Are you using a Wireless Controller? If not, skip ahead to Standalone AP Upgrade Instructions.
If you’re adding a Wireless Controller to an existing installation and the Controller won’t detect your access points, it may be that the AP is running version 4 or older firmware, or that it is not a Controller-compatible AP. To upgrade firmware, follow the Standalone AP Upgrade Instructions below. Visit the Controller Compatibility page for a list of Controller-compatible access points.
If your access point is currently managed by a Wireless Controller, do the following:
Standalone AP Upgrade Instructions
Note: If you need help getting your computer connected to the AP on the same wired LAN, please refer to the IP Addressing help page at luxul.com/ip-adressing.