Most Luxul network devices are configured to use a default self-assigned IP address in the 192.168.0.X range. If the device you’re configuring is connected to a network with a 192.168.0.X address scheme, and your computer shares a similar address on the same network, you should be able to connect to the device and get started with configuration.
If your network uses an address scheme different from 192.168.0.X, you’ll need to set your computer’s IP address to a static address temporarily so you can connect to the device and configure it. To do so, set the IP address of your computer to an address in the 192.168.0.X range, then set the Gateway/Router address to the same as the address of the device you’re configuring. Refer to the videos below and find the video for your operating system.
Once you’re finished configuring the device, you can return your computer’s IP configuration to normal, typically “Obtain Automatically/DHCP.”
Set a Static IP on Windows 8
Set a Static IP on Windows 7
Set a Static IP on Windows Vista
Set a Static IP on Apple OSX