After completing the upgrade to 4.1.3, there are 2 options for the settings to be applied:
The final configuration should resemble the image (Figure 1) below.
Note: If you restore a 4.1.2 config after factory defaulting, you will need to manually configure the settings as described in option 1 above.
This firmware release includes two minor changes, primarily for users of HD over IP video systems such as Just Add Power or Wyrestorm. This upgrade is optional for AMS-4424P switches not being used to support an HD over IP system.
Supports up to 18 virtual interfaces (up from 8), enabling more VLAN-based I/O “channels” with an HD over IP system such as Just Add Power.
Resolved an issue with IGMP that was causing a problem with video over IP systems like Wyrestorm.
Click here for upgrade instructions
Firmware Version 4.1.3
Firmware Version 4.1.2
Firmware Version 22.214.171.124
Firmware Version 4.0.8
Firmware Version 4.0.7
Firmware Version 4.0.6