Release Firmware Version 6.5.1
Recommended Update
Enhancements:
- Adds support for Luxul ProWatch remote monitoring & management application (coming soon)
- Fixes static leases table sorting
- Minor UI improvements and fixes
Known Limitations:
- For known limitations, please see “Known Limitations” notes under previous firmware version
Release Firmware Version 6.4.0
Enhancements:
- You will now be required to change the default admin password upon first login. The new password cannot be the existing default password. This is to comply with new security laws for California & Oregon that go into effect January 1, 2020
- When router is in a factory default state, the WAN port will be disabled until the admin password has been changed (see above)
- Minor UI updates and improvements
Known Limitations:
- When using Safari on macOS, in some cases when changing the admin password you are not redirected to a new login screen. Solution: Close the current tab/browser, open a new tab/browser session and browse to the new IP address of the device. This fixes the issue and will allow you to move forward.
- If enabling Domotz, please see “Known Limitations” notes under firmware version 6.2.7.
Release Firmware Version 6.3.2
Recommended Update
Enhancements:
- Update to the Router Limits agent allowing for bandwidth monitoring & speed tests
- Minor UI and bug fixes
Issues Resolved:
- DDNS Save Issue Resolved
Known Limitations:
- If enabling Domotz, please see “Known Limitations” notes under firmware version 6.2.7.
Release Firmware Version 6.2.7
Issues Resolved:
- Corrects the issue of not being able to “pause” the internet while using Domotz or the Violet app.
Known Limitations:
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient. DO NOT make any changes to your router until this is finished.
Release Firmware Version 6.2.5
Issues Resolved:
- Fixes the issue on the Epic 4 where Domotz stops running.
Known Limitations:
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient. DO NOT make any changes to your router until this is finished.
Release Firmware Version 6.2.4
Enhancements:
- Adds Domotz VLAN support
- Minor UI fixes and improvements
Known Limitations:
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient. DO NOT make any changes to your router until this is finished.
Release Firmware Version 6.1.6
Enhancements:
- Adds support for Domotz Violet App
- Improved Domotz stability
Known Limitations:
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient. DO NOT make any changes to your router until this is finished.
Release Firmware Version 6.1.3
Enhancements:
- Corrects the Auto Update redirect error.
Known Limitations:
- This Domotz version only monitors the management VLAN/VLAN1. Added VLANs will be added in a future release.
- Mac Address filtering will be added to a future release.
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient. DO NOT make any changes to your router until this is finished.
Release Firmware Version 6.1.2
Enhancements:
- Added Domotz functionality
- Fixed issue when adding Static Leases
Known Limitations:
- This Domotz version only monitors the management VLAN/VLAN1. Added VLANs will be added in a future release.
- Mac Address filtering will be added to a future release.
- After enabling Domotz the router will be under high utilization while the Domotz agent is installed, updated (if necessary) and configured. This can take about 5 minutes. Please be patient.
- It is best practice after an update to close the browser/tab to the router UI and open a new browser/tab and reconnect to the router. There can be an issue following an update where an error message appears
(Error: Autoupdate_Controller/checkFirmwareDownloadmight be missing). If this happens, close the browser tab showing the router UI and open the router UI in a new browser/tab.
Release Firmware Version 6.0.0
Enhancements:
-
Internet Monitoring and Recovery of WAN interface
-
Removed the “Hidden Beta Page” and added an “Advanced” menu to the Administration submenu
-
Added the Import Setting to the Backup/Recovery option
-
Improved the VLAN Setup, Editing and Deleting options on the VLAN Page
Issues Resolved:
-
Daylight Savings for the Pacific Time Zone is Now Applied Correctly
-
USB Led Light Would Not Turn on When In Use
-
Applying VLAN Changes Does Not Display the Pinwheel Indefinitely
-
Updated and Fixed Some Help Menu Items
-
Port Forwarding Entries Cleaned Up
Known Issues:
-
When adding a Static Lease using the Discovered Clients section, if the Hostname has an “*” in the field, the Static Lease will be created but the DHCP server will stop working. Simply rename the Hostname and remove the “*” to recover the DHCP server
DISCLAIMER:
Domotz is a third-party software feature ("Third Party Software") for which Luxul offers no warranty, expressed or implied. While this Third Party Software has been tested for compatibility with your Luxul router, it is being offered on an "as is" basis and all operational scenarios cannot be guaranteed.
By enabling this Third Party Software, you accept all risks associated with its use. Luxul will endeavor to support the Third Party Software to the best of our ability. However, development and support ultimately are the responsibility of the Third Party Software vendor. Note that this Third Party Software is optional. As such, if you are unwilling to accept the potential risks associated with its use, please disable it.
This Third Party Software is supplied subject to the applicable terms as defined by the vendor of the Third Party Software, and any use of the same is also subject to the applicable terms. Please contact the Third Party Software vendor for more information and/or applicable terms.
